Security window film is often described by its thickness: 8 mil, 14 mil, 15 mil and other specifications. But film thickness alone does not determine how a glazing system will perform during a forced-entry attempt. For many security applications, the relationship between the film, glass and window frame is just as important.
Film Can Hold Broken Glass Without Holding It in the Frame
Security window film bonds to the glass surface and helps keep fragments together when the glass breaks. If the filmed glass is not connected to the frame, however, a sufficiently strong impact may dislodge the entire glass-and-film unit from the opening. That may still provide useful fragment-retention performance, but it is different from a system designed specifically to delay forced entry. This is why a basic daylight installation and an attached security-film system should not be treated as interchangeable.
Forced-Entry Systems Often Require Frame Attachment
Current manufacturer guidance makes this distinction clear. 3M states that some of its safety and security films must be installed with its Impact Protection Attachment Sealant for break-and-entry applications. The manufacturer also makes clear that the system can help delay intruders but is not designed to stop them indefinitely. Review 3M’s security window-film system information
A properly designed attachment system helps transfer loads from the filmed glass into the framing system.
Common approaches include:
Wet-Glaze Attachment
Structural sealant overlaps the film and frame around the perimeter of the glazing.
Mechanical Attachment
A mechanically fastened system secures the film to one or more sides of the window frame.
CWS has considerable experience with attachment systems. The company provides a more detailed technical explanation of both methods in its guide to security window film attachment systems.
The Complete Glazing System Has to Be Evaluated
Simply adding the strongest available film or the largest attachment bead does not automatically produce the strongest system. Existing glass type, frame construction, anchorage, film, attachment and threat objective all influence performance. The scale of these systems can be seen in projects such as the University of Florida & Shands Medical Center installation, where CWS used both wet-glaze and four-sided mechanical attachment across hundreds of windows.
That is also why security film should not be marketed as “intruder-proof” or “bulletproof.” Its role in a forced-entry application is to make penetration more difficult and potentially create additional response time. For building owners, schools, government agencies and other facilities evaluating existing glass, the main takeaway is straightforward:
Do not specify security film by thickness alone. Determine what the glazing is expected to do, then select and install the complete system required for that objective.